Ocean Optics NanoCalc - Manual (Page 35)

Ocean Optics Germany GmbH Thin Film Metrology
34
main menus of mapping mode
1. menu “Recipes”
• Save as map recipe
• Load map recipe
Here you may save or load ALL the settings you have done in all the various possibilities. It is
recommended to save your usual settings in a recipe. It is possible to use a special recipe name like
“myownRecipe”. Recipes for mapping will receive the extension “.mrc” and will be saved in menu
“Recipes\Map_Recipes”
2. menu “Teach in”
This will be explained later in a following section
3. menu “help”
this is the usual access to help functions
main buttons (lower right side)
reference
you can take a reference with a blank reference wafer (right mouse button=time adjuastments possible)
measure
you can take a real (test) measurement with your sample. Thus you can control all settings before you
start the mapping
clear
clears the screen