Ocean Optics NanoCalc - Manual (Page 46)

Ocean Optics Germany GmbH Thin Film Metrology
45
Result list for online/multipoint mode
On the first tab you see the fitness for each measurement, on the second tab you see the measured
thickness values (for a one-layer system). In the picture above there 25 measured data points.
In the text windows below the data window you see mean values, maximum and minimum values and
standard deviation σ, the 3σ-value and the number of failures (according to the measured fitness and your
fitness limit).
If you press “write data to EXCEL-file” the data are transferred to an .xls-file (Excel need not be installed on
this PC).
If you press this Excel-button together with the SHIFT-key the text will switch to “write data as csv-file” and
such a csv-file will be generated instead of an .xls-file.
With “close all windows” you will return to NanoCalc main window and all online windows will be closed.
7.4.6 Analyze online/multipoint data
This feature helps to analyze online/ multipoint data that have been measured earlier.
You are asked for a file name (extension: .onl) in directory NanoCalc\data\online_files. Then the results
window is opened and you may inspect your data, plot the data or export them to Microsoft Excel.