SENA PS400 - Manual (Page 26)

26
3.3.2 PPPoE setting
To make the HelloDevice Pro Series work in PPPoE mode, users need to configure the PPPoE
username and password for their ADSL account.
---------------------------------------------------------------------------
IP configuration
---------------------------------------------------------------------------
Select menu
1. IP mode : PPPoE
2. Change PPPoE username : whoever
3. Change PPPoE user password : pppoepwd
<ESC> Back, <ENTER> Refresh
-----> 2
Enter user name : pppoeuser
---------------------------------------------------------------------------
IP configuration
---------------------------------------------------------------------------
Select menu
1. IP mode : PPPoE
2. Change PPPoE username : pppoeuser
3. Change PPPoE user password : pppoepwd
<ESC> Back, <ENTER> Refresh
-----> 3
Enter password : pppoepassword
---------------------------------------------------------------------------
IP configuration
---------------------------------------------------------------------------
Select menu
1. IP mode : PPPoE
2. Change PPPoE username : pppoeuser
3. Change PPPoE user password : pppoepassword
<ESC> Back, <ENTER> Refresh
----->
Figure 3-8. Set up username and password for PPPoE account