SENA PS400 - Manual (Page 61)

61
8.3 Ping test
You can test your network configuration by sending ICMP echo messages (ping) to remote hosts in
4.Ping Test menu. Figure 8-5 shows how to use ping test function to check network connection.
-----> 4
Enter IP Address or Hostname to ping : 192.168.1.1
to 192.168.1.1 pining 4times..
Receive time = 1 ms Sequence num = 0
Receive time = 1 ms Sequence num = 1
Receive time = 1 ms Sequence num = 2
Receive time = 1 ms Sequence num = 3
Figure 8-5 Ping test screen
8.4 Socket reset
You can reset the network socket for the corresponding serial port in 5.Socket Reset menu. Figure
8-6 shows how to reset sockets and serial ports manually.
-----> 5
Select a serial port to reset:
1 = port#1 : Listen (6000)
2 = port#2 : Listen (6001)
3 = port#3 : Listen (6002)
4 = port#4 : Listen (6003)
-----> 1
Are you sure to reset? (y/n): y
Socket Initialized !
Figure 8-6 Socket reset screen