SENA Promi-MSP User Guide User Manual
Page 13
Advertising
13
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
(12)
Press Enter; Promi-MSP
™
will prompt reboot request.
Enter ‘Y’ [Yes]; press
Enter to reboot Promi-MSP
™ to apply the revised Network Settings.
(13)
Enter Login ID and Password.
Default ID: admin, Password: 11111
(14)
Revised Network settings are displayed
<An example: Revised Network Settings>
(15)
Networking configuration is complete. The preceding example shows static IP
assignment to Promi-MSP
™ . User selects static, DHCP or PPPoE IP as needed.
Advertising