1 external view – SENA Promi-MSP User Guide User Manual
Page 7
Advertising
7
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
1.1 External View
<Fig. 1.2> Promi-MSP 102(a)/(b) external view
① DIP Switch
Users may select the way of data communication with host PC. Default setting is
TCP/IP communication using no. ④ RJ45 marked EXT, but if users need, data
communication via no. ③ RS232 Interface marked “IOIOI” is also possible.
If DIP switch is on the side of drawing
, Promi-MSP communicates with
Host via Ethernet line (TCP/IP).
If users want to use RS232 com. please change the direction of switch to the
other way. (effective after power-cycling)
② Power Port: For Power Adapter connection
EXT
INT
Advertising