6 commands for repeater mode, 7 commands for bluetooth configuration – SENA Promi-MSP User Guide User Manual
Page 49
49
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
<del> <src> <dst>
<ptp|multi|manual>
:
To configure Routing table for Repeater Mode.
src: Bluetooth address of source device
dst: Bluetooth address of destination device
Response:
src > dst
Ex.:
ROUTE
00:0B:53:12:03:A8 > 00:00:00:00:00:00
00:00:00:00:00:00 > 00:0B:53:12:03:A8
+OK
5.6 Commands for Repeater Mode
STATION <bdaddr>
:
To configure Bluetooth address of station Promi-MSP.
In repeater mode Promi-MSP will try to connect to this device.
Ex.:
STATION 00:0B:53:00:00:01
+OK
REPEATER
:
Display all of repeaters and Bluetooth devices connected currently.
Entry starting with R is repeater and one with P is Bluetooth device.
Response:
R|station|repeater|repeater_name
P|msp|peer|peer_name
Ex.:
REPEATER
R|00:0B:53:00:00:01|00:0B:53:00:00:02|Promi-MSP_001002
P|00:0B:53:00:00:02|00:0B:53:00:00:10|PSDv3b-000010
+OK
5.7 Commands for Bluetooth Configuration
BTNAME <name>