SENA Parani-ESD100V2-110V2 - Manual (Page 21)

21
Click [Next] with after selecting the check box, which makes the unit discoverable, in which ESD1 can
be discovered and connected from the other Bluetooth device.
Remove ESD1 from the host computer, remember to leave the ESD1 powered on.
Now, plug ESD2 into the serial port of the host computer and power on the unit.
Figure 3-12 ParaniWizard Step 3
Click [Wizard Setting] button to configure the serial settings of ESD2. These settings must be same as
those of the host system, to which ESD2 will be used. Click [Next].
Figure 3-13 ParaniWizard Step 4