SENA Parani-ESD100V2-110V2 - Manual (Page 23)

23
It may take about 5 seconds to complete the connection.
For the automatic connection to take place between ESD1 and ESD2, the proper operation mode of
ESD1 and ESD2 have to be set.
Figure 3-16 ParaniWizard Step 7
Set the operation mode of ESD2 to Mode1.
Figure 3-17 ParaniWizard Step 8
Remove the ESD2 from the host computer and plug ESD1 into the serial port again. Set the operation
mode of ESD1 to Mode2.