SENA Parani-MSP1000 - Manual (Page 45)

45
Current time : 07/28/0107 16:03:36 Serial No. : msp1000-test-2
F/W Rev. : v0.0.1_0827_1 MAC Addr.(eth0) : 00:01:95:AF:BE:11
IP Mode (eth0) : Static IP IP Addr. (eth0) : 192.168.11.30
--------------------------------------------------------------------------------
1. System status
2. Bluetooth neighborhoods
3. PAN connections
4. LAP & DUN connections
5. SPP connections
6. TCP connections
<Enter> Refresh
---> 5
--------------------------------------------------------------------------------
SPP connections
--------------------------------------------------------------------------------
No. BD address Device name LM RSSI LQ
1. 00:01:95:06:7C:4A PSD200v2.0.0-067C4A M 0 214
2. 00:01:95:05:CB:DF PSD100v1.1.0-05CBDF M 0 214
Enter a command, available commands are as follows:
dc [index] - disconnect the connection
---> 2
Select data stream to monitor:
1. SPP ---> TCP
2. SPP <--- TCP
3. SPP <--> TCP
---> 3
Select monitoring mode:
1. Text
2. Binary
---> 2
Press 'Q', to exit
Press SPACE, to stop
Press ESC, to menu
<16:04:30, SPP -> TCP>
0000h: 61 73 64 73 61 64 73 61 64 73 64 61 73 61 64
; asdsadsadsdasad
<16:04:30, SPP <- TCP>
0000h: 61 73 64 73 61 64 73 61 64 73 64 61 73 61 64
; asdsadsadsdasad
Note: The configuration menu via serial port doesn’t support port monitoring because the data rate of
serial port is too slow to sniff the Bluetooth data.