Date and time, Removing a trusted ca certificate – SENA Parani-MSP1000 User Manual
Page 51
51
not be established.
In order to upload a new certificate of trusted CA:
1.
Select Certificates of Trusted CA menu
2.
Select the certificate file of CA
3.
Select “Submit” button.
Note: If there is already the same name of file, rename the certificate. The name of file doesn’t affect
the certificate.
7.3.4. Removing a Trusted CA certificate
In order to remove an existing certificate of trusted CA:
1.
Check the checkbox at front of the CA.
2.
Select “Remove” button.
7.4. Date and Time
The Parani-MSP1000 maintains current date and time information. The Parani-MSP1000 clock and
calendar settings are backed up by internal battery power. The user can change the current date and
time.
Figure 7-4 Date and time configuration
There are two date and time settings. The first is to use the NTP server to maintain the date and time
settings. If the NTP feature is enabled, the Parani-MSP1000 will obtain the date and time information
from the NTP server at each reboot. If the NTP server is set to 0.0.0.0, the Parani-MSP1000 will use
the default NTP servers. In this case, the Parani-MSP1000 should be connected from the network to
the Internet. The second method is to set date and time manually without using the NTP server. This