Billet Specialties Premium Tru Trac Serpentine System - Big Block Chevy User Manual
Page 7
Advertising
www.billetspecialties.com
www.billetspecialties.com
13
Figure 7: Install Power Steering Pump with Pulley
Apply anti-seize to the threads of the two 5/16-24 x 3” socket head cap
screws; place pump to bracket and align.
Install lock washers to screws and thread through the power steering
pump into the bracket and tighten firmly.
Figure 8: Install SD-7 Compressor
A] Apply anti-seize to and install the compressor shoulder bolt and
washer through the lower back ear of the compressor and thread into
the compressor bracket.
B] Tighten this bolt temporarily to hold compressor in place with the top
and bottom ears vertically aligned.
B
A
Advertising