Mustang Motorcycle Seats Wide Touring Vintage Solo Seat with Driver Backrest - Harley-Davidson FX - Manual (Page 3)

These steps are guidelines to help you install your new Mustang product. If you need further
assistance, please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send
an email to [email protected], or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Refers to part numbers: 75563, 75561, 75556, 75340, 75557, 75763, 79113, 79133

Mounting Suggestions
Harley-Davidson® FX/FL Big Twin 1965-1984

Passenger Seat
Tools Required:
• Phillips Screwdriver
Hardware:
• Stock Rear Fender Screw
Baseplate Features:
Mustang passenger seats have two chrome tabs that
align with mounting holes in the back of the solo.
Chrome rear tab matches stock fender hole.
The baseplate features elastic polyurethane rubber
bumpers to protect the motorcycle and soften
vibrations as well as carpet to protect the fender.
Stock One-Piece Seat Removal Steps
1. Remove rear fender screw located behind the passenger seat and set aside. The stock rear
fender screw will be used to attach your new Mustang Passenger Seat.
2. Slide seat back and up.
Mounting of Mustang Passenger Seat
1. Remove two screws from back of Mustang solo seat.
2. Align two chrome tabs located at the front of the passenger seat with holes in back of solo.
3. Screw rear seat and solo together.
4. Align chrome rear tab located at back of passenger seat with hole in fender.
5. Secure with stock fender screw to complete the installation process.
Enjoy the Comfort of your new Mustang Seat!
Updated 10/14/10 AA
back