Mustang Motorcycle Seats Wide Touring Vintage Solo Seat with Driver Backrest - Harley-Davidson FX - Manual (Page 4)

These steps are guidelines to help you install your new Mustang product. If you need
further assistance
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
[email protected] or visit our website at
www.mustangseats.com .
For care and maintenance of our seats, please go to our website under "Support".
Refers to part numbers: 75527, 75557, 79103, 79113, 75756, 75763, 79123, 79133, 75562, 75563,
75056, 75338, 75561, 75556, 75340
Mounting Suggestions
Harley-Davidson® FX/FL Big Twin 1965-1984
Two-Piece Seat
Tools Required:
• Phillips Screwdriver
Hardware:
• Stock Rear Fender Screw
• Two rubber expansion plugs with
threaded inserts and bolts (Included
for Solo Only installation)
Baseplate Features:
The 16 gauge formed steel baseplate is black powder
coated. Rubber bumpers on the solo and carpet on
the rear seat prevent them from touching the frame or
fender.
Stock One-Piece Seat Removal Steps
1. Remove rear fender screw located behind the passenger seat and set aside. The stock rear
fender screw will be used to attach your new Mustang Two-Piece Seat.
2. Slide seat back and up.
Mounting of Mustang Solo & Passenger Seat
1. Remove two screws from back of Mustang solo seat.
2. Align two chrome tabs located at the front of the passenger seat with the mounting holes in
back of solo.
3. Screw rear seat and solo together.
4. Slide solo front forks under frame.
5. Align chrome rear tab located at back of passenger seat with stock hole in fender.
6. Secure in place with stock fender screw to complete the installation process. Note: Use of
side brackets optional and would use the rubber expansion plugs, threaded inserts, and
bolts used for a solo only installation.
Enjoy the Comfort of your new Mustang Seat!
Updated 10/14/10 AA
back