SCANTECH ID (Champtek company) V-1040BT - Manual (Page 12)

4
CHAPTER 2 GENERAL DESCRIPTION
2.1 Use of the V-1040BT
The V-1040BT is very ergonomic and modern designed and
very user friendly. It can be connected to your POS or
Host system trough a RS232 cable, KBW cable or USB cable.
To read a bar code, simply press the red trigger button
and aim the beam to the bar code. It needs to position
the beam to fall across all bars in the 1D barcodes. You
will hear one beep and the green LED indicator will light
on after scan successfully.
The programming of the V-1040BT is very easy. You can
setup the V-1040BT by scan all necessary programming
codes that meet applications. Thanks to the powerful
decoding software, the V-1040BT can decode all major 1D
codes.