QTech Data Systems Intermax Cellular Modem - Manual (Page 5)

DATRAN ll eXcel Cellular IP RTU - Quick Start Guide – v2.1 September 2012
www.qtech.co.nz Tel: 03 3663713
7. Disconnect the Maxon Intermax modem from the computer and connect it to the Q03 RTU using the
Q03 RTU-to-Maxon Intermax data cable. Ensure that the end where the power cable comes out from is
connected to the Maxon Intermax modem.
Note: If you know the phone number of the SIM card inside the Intermax Modem, you can find out its
receiving signal strength indication (RSSI) by sending the following text message: “Module.all”. The
RSSI value is in the <rscp> section. To reset the Intermax Modem remotely, send the following text
message: “Module.reset”.