Installing the neutral sensor, Outline of the neutral sensor for ak-50 breakers, Installing mounting brackets – GE Industrial Solutions ProTrip Conversion Kits AK-50, AKU-50, AKS-50, AKT-50, AK-75, and AK-100 User Manual
Page 20
SECTION 7. EQUIPMENT
CONVERSION
Installing Mounting Brackets
The equipment compartment contains the mating
portions of the fourth-wire disconnect and the neutral
sensor. The same disconnect assembly is used for types
AKD, AKD-5, and AKD-6 switchgear. Mounting brackets
for AKD, AKD-5, AKD-6, and AKD-8 switchgear
applications are included in the conversion kit. Figures
31, 32, 33, 34, and 35 are mounting diagrams for the
various applications. Table 1 is a key to the numbers
used in these figures to indicate various hardware items.
Figure 31. AK-50 & AKS-50 fourth-wire disconnect for
AKD.
Legend Description
225
Breaker portion of fourth-wire disconnect
226
Equipment portion of fourth-wire disconnect
229
Mounting bracket for AK-100 for AKD
compartments
230
10-32 x 1.375 inch mounting screw
231 Insulation
232
#10 lock washer
233
#10 flat washer
235
1
/
8
-20 flat washer
236
1
/
8
-20 lock washer
237
1
/
4
-20 nut
238
1
/
4
-20 x 1.25 inch mounting screw
239 Bracket
Figure 32. AK-75 & AK-100 fourth-wire disconnect for
AKD-5 & AKD-6.
Table 1. Legend for number symbols appearing in
Figures 31–35.
Figure 33. AK-100 fourth-wire disconnect for AKD.
20