Network settings – GE Industrial Solutions WattStation Pedestal EVSE Charger Operation and Maintenance User Manual
Page 33
Advertising
WattStation™ EV Charger User Manual
3333
GE Energy
©2012 GE Company All Rights Reserved
4.2.8
Network Settings
This tab is used to configure the network settings of the WattStation.
Figure – 4.17
•
Enabling Networks and DHCP
Note that the wired Ethernet port cannot be disabled. Dynamic Host Control Protocol (DHCP)
tells the WattStation to get IP addresses from DHCP servers if available.
•
Static IP settings, subnet masks and gateway IPs
These settings are used if DCHP functionality is disabled, or if a DHCP server is not found.
Advertising