GE Industrial Solutions Austin MicroLynx II 12V SIP User Manual
Austin microlynx, Rohs compliant ez-sequence, Features
Advertising
Table of contents
Document Outline
- Features
- Applications
- Description
- Absolute Maximum Ratings
- Electrical Specifications
- Electrical Specifications (continued)
- Electrical Specifications (continued)
- General Specifications
- Feature Specifications
- Characteristic Curves
- Characteristic Curves (continued)
- Characteristic Curves (continued)
- Characteristic Curves (continued)
- Design Considerations
- Input Filtering
- Output Filtering
- To reduce the output ripple and improve the dynamic response to a step load change, additional capacitance at the output can be used. Low ESR polymer and ceramic capacitors are recommended to improve the dynamic response of the module. For stable operation of the module, limit the capacitance to less than the maximum output capacitance as specified in the electrical specification table. Safety Considerations
- Feature Description
- Remote On/Off
- To provide over temperature protection in a fault condition, the unit relies upon the thermal protection feature of the controller IC. The unit will shutdown if the thermal reference point Tref2, (see Figure 33) exceeds 140oC (typical), but the thermal shutdown is not intended as a guarantee that the unit will survive temperatures beyond its rating. The module will automatically restarts after it cools down.
- Feature Descriptions (continued)
- Output Voltage Programming
- Through-Hole Lead-Free Soldering Information
- Mechanical Outline
- Top View
- Recommended Pad Layout
- Through Hole Pad Layout – Back view
- Ordering Information