1 pre defined test – GE Industrial Solutions Entellisys 4.0 System Test Kit User Manual User Manual
Page 36
Advertising
![background image](/manuals/295498/36/background.png)
System Test Kit
36
1.6.2.1 Pre Defined Test
Tests the various Relay Protection functions using pre-defined fault levels for ease of use.
Figure 1-17 Pre-Defined Relay Protection Test
Quick Test Guide
1. Enter Operator Name and Test Description.
2. Select a Breaker.
3. Select Breaker Trip or No Trip Test.
4. Select Ground Fault Defeat or Resume depending on Fault Phase(s) desired.
5. Select the Test Selection to perform.
6. Select the Fault Phase.
7. Click Perform Test.
Advertising