GE Industrial Solutions Pulsar Plus Controller - Manual (Page 32)

Pulsar Plus Controller Family
Issue 7 December 2011 32
Connect to the Controller
Step Action
Table 4 Auxiliary Input Connector
Pin #
Wire Color
Signal Name Description
1
(BK)
Aux Input 1
(Aux1)
Auxiliary input to monitor a contact closure or open to its
respective return on pin 8, Auxiliary Input Return. See
Appendix E for alarm assignments
2
(BR)
Aux Input 2
(Aux2)
Auxiliary input to monitor a contact closure or open to its
respective return on pin 8, Auxiliary Input Return. See
Appendix E for alarm assignments
3
(R)
Aux Power
Major Input
(AMJ) Auxiliary input to monitor a contact closure to the non-
grounded side of a dc bus (±24V/-48V) to create the
standard Auxiliary Power Major alarm. See Appendix E for
alarm assignments
4
(O)
Plant Battery
Test/ Group
Standby/TR
(GSTR) Dedicated input to be monitored for a contact closure to
its respective return on pin 9. Used for Plant Battery Test
and Group Standby Feature. Factory default as the Group
Standby feature upon a contact closure.
5
(Y)
Emergency
Power Off
(EPO) Dedicated EPO input to be monitored for a contact closure
to its respective return on pin 10, Emergency Power Off
Return.
6
(G)
Aux Input 3
(Aux3)
Auxiliary input to monitor a contact closure or open to its
respective return on pin 8. See Appendix E for alarm
assignments.
7
(BL)
Aux Input 4
(Aux4)
Auxiliary input to monitor a contact closure or open to its
respective return on pin 8. See Appendix E for alarm
assignments.
8
(V)
Aux Input
Return
(Aux_R)
Return for Auxiliary Inputs 1-4.
9
(S)
Plant Battery
Test/ Group
Standby (TR)
Ret.(GSTR_R)
Return for Plant Battery Test and Group Standby.
10
(W)
Emergency
Power Off Ret.
(EPO_R)
Return for EPO input.