GE Industrial Solutions ISM - Manual (Page 26)

Modifications reserved Page 26/34
OPM_ISM_OPT_10K_M50_0GB_V021.doc Operating Manual ISM – Intelligent Synchronization Module
6.2 ALARM
The alarms mode is entered any time when the ALARMS button is pressed.
The LCD will display a series of screens corresponding to the last 256 events, one event per screen.
The buttons perform the following functions:
METERING Abandons
alarms mode and enters metering mode.
ALARMS Next
screen.
PARAMETERS Abandons
the alarms mode and enters the parameters mode.
+
Scrolls forward to the next screen.
–
Scrolls backward to the previous screen.
ENTER
Displays the main screen for this mode.
The events displayed are the standard GE events as described in the Section 6.2.1 - EVENTS (Alarms
and Messages).
The information displayed includes:
•
The exact date and time when the event occurred.
• The number of the event, 255 being the most recent event, and 0 the oldest.
• The standard GE code for the event and the machine status word.
• An explicit text description of the event.
15.09.2003 22:11:51
NR = 255 Status=FA12
4000: SETUP VALUES
LOST
PARAMETERS
METERING
ENTER
-
+
ALARMS
The initial screen of this mode is the one showing the most recent event.