5 remove – GE Industrial Solutions ADVANCED SNMP WEB INTERFACE CARD User Manual
Page 9
Modifications reserved
Page 9/33
OPM_CNT_ADV_SNM_CRD_XGB_V050.doc
Operating Manual ADVANCED SNMP / WEB INTERFACE CARD
5 REMOVE
WARNING !
The work to be done is reserved to Service engineers which have been
previously trained on these UPS's, and therefore have thorough
knowledge about the function and handling of this equipment.
NOTE !
The installation and cabling of the option “Advanced SNMP/
WEB Interface” must be performed by QUALIFIED SERVICE
PERSON.
Please refer to the “Safety Rules” included in the “Operating Manual” of
the UPS.
Please read carefully the UPS “Operating Manual & installation Guide”
before installing or operating the equipment.
If any problems are encountered with the description of this installation
guide, please contact the nearest Service Centre before proceeding.
1
Switch off the UPS, and wait approx. 2 minutes or switch the UPS to the manual
bypass
Please ensure that the mains input is reliable during this period.
2
Remove all connections from the Advanced SNMP Card
3 Remove
the
Advanced SNMP Card from the slot
4
Switch on the UPS or go back to normal mode from bypass