GE Industrial Solutions BDCBB H569-445 - Manual (Page 9)

Secondary DC Power Distribution Bay H569-445
Issue 3 June 2012 9
Getting Started
Tools and Hardware
You will need the following tools and hardware to install the BDFB:
• Material-handling equipment to unload the cabinet at the installation site,
remove from shipping container, and set in final position [minimum lifting
capacity: 500 lbs. (227Kg)] Note: Use the equipment weights and dimensions as a
guideline for choosing material-handling equipment.
• Digital multimeter (DMM) with 0.05% accuracy on dc scale
• Insulated hand tools
• Screwdrivers (flat-blade and Phillips)
• Wire cutters and stripper
• Crimp Tools
• Drill and Drill Bits to install floor anchors
• Torque wrenches 25-720 in-lb
• Sockets: 5/16”, 7/16”, 9/16”, 3/4”, 15/16”, 19mm
Torque Setting for Hardware
English
Screw Size Torque (N-m) Torque (in-lb)
6-32 1.1 10
10-32 2.8 30
1/4”-20 7.3 65
5/16-18 15 135
3/8”-16 27 240