Canon PowerShot S30 - Manual (Page 114)

112 Printing with Card Photo Printer CP-10 (Optional)
Card Photo Printer CP-10, sold separately, can be connected to the camera and
used to print images very easily directly from the camera. It can also be used with
the DPOF print settings.
Connecting Card Photo Printer CP-10
to the Camera
Two direct interface cables are supplied with the printer. Use the cable (DIF-100)
that has a Symbol on the connector to connect to this camera.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• You are recommended to use a household power supply to power the camera
when it is connected to the printer. If you are using a battery pack, ensure that it is
fully charged.
1 Turn off the camera (p. 27, 29).
2
Attach the power cable to the printer
and plug the other end into power
supply.
3
Connect the camera and printer using
the direct interface cable.
• When you insert the cable, make sure the
mark of the cable faces the rear of the camera
(monitor side).
Printing with Card Photo Printer CP-10 (Optional)
Direct Interface
Cable DIF-100
DIGITAL Terminal
Connection
to Power
Supply