Canon PowerShot S30 - Manual (Page 123)

Printing with Bubble Jet Printer (Optional) 121
Bubble Jet Printer* with the direct print function, sold separately, can be connected
to the camera and used to print images very easily directly from the camera. It can
also be used with the DPOF print settings.
* Not sold in some regions
To find out if your Bubble Jet Printer supports the direct print function,
or for general information about Bubble Jet Printers, please also refer to
the Quick Start Guide supplied with your Bubble Jet Printer.
Connecting Bubble Jet Printer to the Camera
Use the Bubble Jet Printer - digital camera connection cable supplied with your
Bubble Jet Printer.
Be sure to turn off the camera before connecting to Bubble Jet Printer.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• You are recommended to use a household power supply to power the camera
when it is connected to the printer. If you are using a battery pack, ensure that it is
fully charged. The printing may stop if the camera battery is discharged even if it is
not complete; therefore, early replacement of the low battery with a fully charged
one is recommended.
1
Connect the camera and printer using
the cable.
• When you insert the cable, make sure the
“Canon” logo on the cable faces the front of
the camera (lens side).
2
Slide the power/replay lever to the right
to turn on the camera.
• appears on the camera LCD monitor and the
power/mode indicator is lit green when the
printer is properly connected to the camera.
Printing with Bubble Jet Printer (Optional)
To Bubble
Jet Printer
DIGITAL
Terminal Bubble Jet Printer -
digital camera
connection cable