Canon PowerShot S30 - Manual (Page 49)

Shooting - Letting the Camera Select Settings 47
Using the Flash
Use the flash according to the guidelines below.
1
Press the button to switch between
flash modes.
• The selected flash mode appears on the LCD
monitor.
2
Shoot the image.
• The flash will fire if the indicator beside the viewfinder shines orange when
the shutter button is pressed halfway.
• Shooting procedures are the same as for the Auto mode (p. 44).
Built-in Flash Settings
The flash cannot be used with some shooting modes.
●*
●
–
–
●
–
–
–
–
●*
●
●
●
●
●*
–
–
●
●
●*
–
–
●
●
●*
–
–
●
●
●*
–
–
–
▲
●*
●
●*
●
●
●
●*
●
●
●
●
●
●*
●
●
●
●
●
●
●
●*
●
●
●
●
●*
●*
●
●
●
●
Red-eye
reduction, Auto
Auto
Red-eye reduction,
Flash on
Flash on
Flash off
Red-eye reduction, Auto
Auto
Red-eye reduction, Flash on
Flash on
Flash off
The flash fires automatically as required by the lighting level, and the
red-eye reduction lamp fires each time the main flash fires
The flash fires automatically as required by the lighting level.
The red-eye reduction lamp and the flash always fire.
The flash always fires.
The flash does not fire.
* Default setting.
● Setting selection is possible.
▲ Setting can only be selected for the first image.
- Setting selection is not possible.