GE Industrial Solutions HE300GEN150 User Manual
Page 12
Advertising
MAN0373-01 13 APR 2000 PAGE 13
CH.2
Table 2.1 -– Genius LEDs
LED
Description
GENA OK
Illuminated unless there is a fault with the GENA
board.
COMM OK
The “COMM OK” indicator illuminates when the GENA
board is communicating with the Genuis Bus
Controller (GBC) properly. If the “COMM OK” LED is
not illuminated after configuration, check the following:
Make sure the cable is wired correctly between the
GBC and the option card.
Check the GBC configuration (LM90 Configuration
package). The Global data length, and the Directed
control data length must match the input length and
the output length respectively.
Advertising