GE Industrial Solutions 6KCV301DGF User Manual
Page 44
—————— Digital General Function Card ——————
44
GEI-100430
reset alarm
status to IDLE
READY to RUN
IDLE to READY
k010
If you want to perform one of the above transitions, display it and then press enter(ENT).
If it is possible to perform the selected transition, the new status will be displayed in
the first line of the menu.
To return to the main menu of the DGF press cancel (CANC) until you find:
opt: DGFC
status DGFC
k007
MENU ARCHIVES:
From this menu it is possible to verify, save, load, or initialize the whole database
(Application program + Parameters), only parameters, or only bricks.
NOTE: These commands can be executed only in IDLE condition.
To access this menu (from OPTION/OPTION2/MENU) move among menus by pressing
UP and DOWN until you find:
opt: DGFC
archives
k012
then press enter(ENT). You are now in archives menu.
Once enter is pressed the following information will be displayed:
archives
check all DB
k013
The first line never changes.
The second line shows the possible action you can choose. Available actions are:
action
meaning
check all DB
checks all DB
save all DB
saves in flash all DB
load all DB
loads from flash all DB
init all DB
initializes all DB
check parameter
checks parameters
save parameter
saves parameters in flash
load parameter
loads parameters from flash
default parameter
loads default parameters
check bricks
checks bricks
save bricks
saves bricks in flash
load bricks
loads bricks from flash
init bricks
initializes bricks in RAM
d0300g