GE Industrial Solutions 6KCV301DGF - Manual (Page 45)

45 —————— Digital General Function Card ——————
6KCV301DGF
Choose the desired action, then press enter(ENT).
Once enter is pressed the following information will be displayed:
init briks
are you sure ?
k015
The first line displays the action you have chosen.
The second line(blinking) asks you whether are you sure or not.
Press enter(ENT) to confirm the operation, press cancel (CANC) to abort the operation.
This submenu is very useful to save the parameters from the keypad, without using the
PC. If you want to save the parameters, place the DGF in IDLE status and then select
the “save parameter” action of this submenu.
To return to the main menu of the DGF press cancel (CANC) until you find:
opt: DGFC
archives
k012
MENU SPECIAL FUNCTION:
This menu contains only the input of a password. If the password is enabled, it is
possible to change some of the attributes that are not changeable in the “view parameter”
menu. To access this menu (from OPTION/OPTION2/MENU) move among menus by
pressing UP and DOWN until you find:
opt: DGFC
special funct.
k016
then press enter (ENT). You are now in special function menu.
Once enter is pressed the following information will be displayed:
special funct.
password
k017
The first line displays the name of menu.
The second line display the name of the submenu. Since there are no other submenus,
press cancel to return to the main menu, or enter to enter the password.
If you press enter the following information will be displayed:
password
k018
At this point you must enter the password. The correct password is:
UP
DOWN
CANC
ENT
During the input an asterisk will be displayed for each key pressed.
password
**
k019