Asus RS700-E6/RS4 - Manual (Page 27)

2-9 ASUS RS700-E6/RS4
2.4 Expansion slot
2.4.1 Installing an expansion card to the riser card bracket
The barebone server comes with two riser card brackets. You need to remove the
brackets if you want to install PCI Express x8 or x16 expansion cards.
Follow the illustration below for PCI Express x8 or x16 card installation.
2. Remove the slot cover from the riser card bracket. Install a PCI Express card
to the bracket as shown, and then secure the card with a screw.
3. Align the riser card bracket with the cards to the PCI Express slot on the
motherboard.
4. Press the riser card bracket until the golden connectors completely fit the slot
and the bracket aligns with the rear panel.
5. Connect the cable(s) to the card, if applicable.
1. Firmly hold the riser card bracket,
and then detach it from the PCI
Express x16 slot or PCI Express x8
slot on the motherboard.
Remove the screw on the PCIe
x16 riser card from the rear
panel before detaching the riser
card.