Asus RS700-E6/RS4 - Manual (Page 35)

3-3 ASUS RS700-E6/RS4
4. Select one unit of space (1U) on the
rack where you want to install the
server.
5. Adjust the outer rail length to fit the
rack.
6. Position the outer rail to the 1U
space on the rack and secure both
the front end and the rear end of the
rail with two screws each.
7. Repeat step 4–6 to assemble and
attach the outer rail on the other side
of the rack. Ensure that it is level with
the previously installed rack rail.
8. Align the inner rails on the server
with the outer rails on the rack.
9. Push the server all the way into the
rack.
10. Secure the server to the rack.