Asus WL-320gE - Manual (Page 29)

3. Software
ASUS 802.11g Access Point 2
Chapter 3 - Software Configuration
Access Point
PPTP User
If you are using PPTP services, you would be asked to input the username,
Static IP User
If you are using ADSL or other connection type that uses static IP addresses,
please select the fourth line, then input the IP address, subnet mask, and
default gateway provided by your ISP. You could choose to specify certain
herk036@adsl-comfort
5. Setting up your wireless interface. To set up your wireless interface, follow
the same instructions from 3 to 5 as above Configurating Wireless Interface
in Access Point mode on page 26. You can change to AP or WDS(Bridge),
Station(Client), or URE(Repeater) accordingly. Click Save&Restart to
restart the wireless router and activate the new settings.