Asus WL-320gE - Manual (Page 34)

3. Software
3 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
Access Point
3.7.3 Access Control
Pull down menu items:
Disable (no info required)
Accept (need to input information)
Reject (need to input information)
3.7.2 Site Survey(AP SCAN)
Site Survey will help WL-320gE associate appropriate AP while in Station
(Client) or URE(Repeater) mode. Make sure WL-320gE in Client or URE
mode, click “AP SCAN” button in Wireless -> Interface will pop up a
window. AP Scan will collect complete AP around information including
MAC, SSID, Security, Channel and RSSI(AP wireless signal strength)
value.
To add security, the ASUS 802.11g AP has the ability to only associate with
or not associate with wireless mobile clients that have their MAC address
entered into this page.
The default setting of “Disable” will allow any wireless mobile client to
connect. “Accept” will only allow those entered into this page to connect.
“Reject” will prevent those entered into this page from connecting.