Asus P5BV/SAS - Manual (Page 129)

ASUS P5BV Series 5-31
5.3.1 Creating a RAID 0 set (stripe)
To create a RAID 0 set:
1. From the utility main menu, select 1. Create RAID Volume, then press
<Enter>. This screen appears.
2. Enter a name for the RAID 0 set, then press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow key to
select RAID 0(Stripe), then press <Enter>.
4. When the Disks item is highlighted, press <Enter> to select the hard disk
drives to configure as RAID. This SELECT DISKS screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R
wRAID5
[ CREATE ARRAY MENU ]
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be
used
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-
Name:
RAID Level:
Disks:
Strip Size:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
[ SELECT DISKS ]
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection
Port Drive Model Serial # Size
Status
0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-
RAID Disk
1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-
RAID Disk
5. Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.