Asus P5BV/SAS - Manual (Page 85)

ASUS P5BV Series 4-25
4.5 Power Configuration
The Power Configuration menu items allow you to change the settings for the ACPI
and Advanced Power Management (APM) features. Select an item then press
<Enter> to display the configuration options.
ACPI 2.0 Support [Disabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) 2.0 Support. Configuration options: [Disabled] [Enabled]
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
ACPI 2.0 Support [Disabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Add additional tables
as per ACPI 2.0
specifications.
BIOS SETUP UTILITY
Main Advanced Power Boot Exit
Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for
an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even
if requested. Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices.
When set to [Reserved], the IRQ is reserved for legacy ISA devices.
Configuration options: [PCI Device] [Reserved]
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.