Asus K8N-DRE - Manual (Page 45)

A S U S K 8 N - D R E A S U S K 8 N - D R E A S U S K 8 N - D R E A S U S K 8 N - D R E A S U S K 8 N - D R E 2 - 2 5 2 - 2 5 2 - 2 5 2 - 2 5 2 - 2 5
4 . 4 . 4 . 4 . 4 . S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) (for SCSI model only)
This 68-pin Ultra160/320 SCSI connector supports a maximum of 15
devices as specified by the Ultra160/320 standards.
The onboard SCSI chipset incorporates an advanced multi-mode I/O cell
that supports both single-ended (SE), Ultra2, and Ultra160/320 devices.
With Ultra160/320 devices, the SCSI bus platform performs at full
Ultra160/320 speeds (up to 160MB/s or 320MB/s) and extended
cabling of 12m (or 25m in a point-to-point configuration). When an SE
device is attached, the bus defaults to an SE speed and 1.5m cable
length.
K8N-DRE
®
K8N-DRE Onboard SCSI connector
35
68 34
1
SCSI1
68-Pin Ultra320/
Ultra2-Wide SCSI Connector
5 . 5 . 5 . 5 . 5 . S t o r a g e a d d - o n c a r d a c t i v i t y L E D c o n n e c t o r S t o r a g e a d d - o n c a r d a c t i v i t y L E D c o n n e c t o r S t o r a g e a d d - o n c a r d a c t i v i t y L E D c o n n e c t o r S t o r a g e a d d - o n c a r d a c t i v i t y L E D c o n n e c t o r S t o r a g e a d d - o n c a r d a c t i v i t y L E D c o n n e c t o r
( 4 - p i n H D L E D 1 )
( 4 - p i n H D L E D 1 ) ( 4 - p i n H D L E D 1 ) ( 4 - p i n H D L E D 1 ) ( 4 - p i n H D L E D 1 )
This connector is for the storage add-on card cable connected to the
SCSI or SATA add-on card. The read or write activities of any device
connected to the SCSI or SATA add-on card causes the front panel
LED to light up.
K8N-DRE
®
K8N-DRE Hard disk activity LED connector
HDLED1
1
ADD_IN_CARD_ACT#
NC
ADD_IN_CARD_ACT#
NC