Asus TS700-E6/RS8 - Manual (Page 146)

7-4 Chapter 7: Driver installation
6. Locate the RAID driver and place a blank, high-density floppy disk to the
floppy disk drive.
7. Press <Enter>.
8. Follow screen instructions to create the driver disk.
ITE IT8213F Linux Driver
ITE IT8213F Linux Driver
RHEL 4 UP6 32/64 bit
RHEL 4 UP7 32/64 bit
RHEL 5 UP1 32/64 bit
RHEL 5 UP2 32/64 bit
SLES 9 SP3 32 bit
SLES 9 SP3 64 bit
SLES 10 32 bit
SLES 10 64 bit
FreeBSD 7 32/64 bit
Back
Exit
To create a RAID driver disk in Windows ® environment
1. Start Windows ® .
2. Place the motherboard support DVD into the optical drive.
3. Go to the Make Disk menu, and then select the type of RAID driver disk you
want to create.
4. Insert a floppy disk into the floppy disk drive.
5. Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.
To create a RAID driver disk in Red Hat ® Enterprise Linux server environment
1. Insert a blank formatted high-density floppy disk to the floppy disk drive.
2. Type dd if=XXX.img of=/dev/fd0 to decompress the file into the floppy
disk from the following path in the support DVD:
For LSI MegaRAID Driver
\Drivers\ICH10R LSI RAID\Driver\makedisk\Linux
3. Eject the floppy disk.