Asus TS700-E6/RS8 - Manual (Page 151)

ASUS TS700-E6/RS8 7-9
5. When asked if you will load additional RAID controller drivers, select No, then
press <Enter>.
6. Follow the onscreen instructions to finish the OS installation.
7. If you are installing RHEL AS5, when the installation is completed, DO NOT
click Reboot. Press <Ctrl> + <Alt> + <F2> to switch to the command-line
interface from graphic user interface and execute replace_ahci.sh
following the instructions of step 8.
8. Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
More Driver Disks?
Do you wish to load any more
driver disks?
Yes No
Type the following commands when using a USB floppy.
cat /proc/partitions
Write down the Major and Minor number before sdb for later use.
mknod /dev/sdb b [major number] [minor number]
mkdir /mnt/driver
mount /dev/sdb /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot