Asus NRL-LS - Manual (Page 100)

5-6 Chapter 5: Driver Installation
8. If you want to add other host adapters (that are not a part of the Ultra160
Family), do so at this time by pressing 'S' and repeating step 5 for each
additional adapter and inserting the appropriate disk provided by the hardware
manufacturer. The Adaptec Ultra160 Family host adapters use the same driver;
it is not necessary to install the ADPU160M.SYS driver again.
9. Press ENTER to continue with the Windows NT operating system setup.
Follow the instructions given on screen and in the Windows NT installation
documentation.
C. Existing System Installation
1. Boot Windows NT system and log on as Administrator. Click the Start
button on the Windows NT task bar, and the point to Settings.
2. Open the Control Panel, double-click on SCSI Adapters.
3. Select the Drivers tab, and click the Add button.
4. In the "Install Driver" window, click the Have Disk button.
5. Insert the Adaptec Family Manager Set CD-ROM.
6. At the "Copy manufacturer's files from" text box, type
d:\fmsimage\fms111\windows\nt4_0\nt4, and click OK.
7. At the Install Driver window, select the driver, then click OK.
8. In response to "Do you want to use the currently installed driver(s) or install
new one(s)", select the New button. .
9. Type d:\fmsimage\fms111\windows\nt4_0\nt4 and click continue. The
driver is now installed.
10. You must restart your computer for the changes to take effect. Click Yes to
restart your computer. Click No to return to the SCSI Adapters window.