Asus NRL-LS - Manual (Page 117)

ASUS NRL-LS motherboard user guide 5-23
II. Intel 82540EM Network Driver Installation
SCO OpenServer 5.0.6 system can correctly recognize Intel 82540 network
controller during installation. User doesn't need to load or modify the network
driver for the onboard LAN device.
User also can find the Intel 82540 Network driver from ASUS Driver Support
CD at:
\Drivers\Lan\UNIX\SCO5
Instructions for Installing the eeE Driver for SCO OpenServer
1. Copy the eee.vol file to any directory, say /tmp, on the SCO system, renaming
the file as VOL.000.000. Also, make the file read-only by using 'chmod'.
For example,
# cp eeE.vol /tmp/VOL.000.000
# chmod 444 /tmp/VOL.000.000
2. If there is an older version of the driver on the system, you must first remove
it. To do this, run 'netconfig'. Remove all instances of the "Intel ..." adapters.
Exit netconfig without opting to relink the kernel.
3. Install the new driver using 'custom'. When asked for the installation media,
choose 'media images', and type the directory path to the VOL.000.000
file. (In step 1, if you copied it to /tmp, type '/tmp'). After the installation of
the driver is complete, exit 'custom'.
4. Run 'netconfig' and add the adapters. For each adapter that is present in the
system, enter the appropriate TCP/IP parameters. By default, the driver
automatically detects the line speed and duplex mode. If you want to force
any of these settings, choose 'Advanced Options' and set the speed and
duplex modes. Exit'netconfig' and choose to relink the kernel.
5. Reboot the system.At the command prompt, type:
# reboot (or init 6)
III. ATI Rage XL Display Driver Installation
SCO OpenServer 5.0.6 system can correctly recognize ATI Rage XL graphic
controller (ATI RAGE PRO/LT-PRO/XL/Mobility (P/M/M1)) during
installation. User doesn't need to load or modify the video driver for the onboard
VGA device.