Asus P5MT-MX/C - Manual (Page 42)

2-22 Chapter 2: Hardware information
6. VGA graphics controller setting (3-pin VGA_EN1)
This jumper allows you to enable or disable the onboard ATI Rage XL
video graphics controller. Set to pins 1-2 to enable the video graphics
controller.
Make sure to set this jumper to Disable if you want to install VGA cards
on the PCI and PCI Express slots.
P5MT-MX/C VGA Setting
VGA_EN1
Enable
(Default)
Disable
2 1 2 3
®
P
5
M
T
-M
X
/C
7. RAID select setting (3-pin RAID_SEL1)
Set this jumper to 1-2 (Default) to enable LSI RAID ROM. Set this
jumper to 2-3 to enable Intel ® RAID ROM.
RAID_SEL1
LSI RAID ROM
(Default)
INTEL RAID ROM
2 1 2 3
P5MT-MX/C RAID_SEL1 Setting
®
P
5
M
T
-M
X
/C