Asus RS720-E7/RS12 - Manual (Page 38)

Chapter 2: Hardware setup 2-18
2.6 Cable connections
Pre-connected system cables
1. 24-pin EATX power connector (from power supply to motherboard)
2. 8-pin 12V power connector (from power supply to motherboard)
3. Power supply SMBus connector (from power supply to motherboard)
4. System fan connectors (from system fan to motherboard)
5. USB connectors (from motherboard to front I/O board)
6. Serial General Purpose Input/Output connectors
7. SAS connectors (for ASUS PIKE only; from motherboard to SATA/SAS
backplane)
8. Auxiliary panel connector (from motherboard to front I/O board)
• The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
• Refer to Chapter 4 for detailed information on the connectors.
2 2 1
3
4
4
4
4
5
4
6 7
8
4