5 pch scu sas configuration, S.m.a.r.t. status check [enabled – Asus RS720-E7/RS12 User Manual

Page 89

Advertising
background image

ASUS RS720-E7/RS12; RS720-E7/RS12-E

5-21

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor

system. When read/write of your hard disk errors occur, this feature allows the hard

disk to report warning messages during the POST.

Configuration options: [Enabled] [Disabled]

5.4.5

PCH SCU SAS Configuration

The PCH SCU SAS configuration items appears only when you installed the

ASRK Module (optional) on the motherboard. This menu automatically detects and

displays the Device 1-4.
Intel

®

RSTe SATA RAID 5 support requires additional BIOS setting with below two

kinds of H/W configuration. The user can set [SATA only RAID5] as enabled to

have RAID 5 supported with SATA hard drives, but the SAS hard drive cannot be

supported when this function is enabled.
Here are the two kinds of H/W configuration mentioned above:
1.The PCH of the motherboard is hard SKU –B or –D.
or
2.The PCH of the motherboard is hard SKU –A with ASRK #1 or ASRK #5 enabled.

Patsburg B/D sku only

Device1

Not Present

Device2

Not Present

Device3

Not Present

Device4

Not Present

Sata only RAID5

[Disabled]

→←:

Select Screen

↑↓:

Select Item

Enter: Select Item

+/-: Change Opt.

F1: General Help

F2: Previous Values

F5: Optimized Defaults

F10: Save & Exit

ESC: Exit

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced

Version 2.15.1219. Copyright (C) 2011 American Megatrends, Inc.

Advertising
This manual is related to the following products: