Asus WL-330gE - Manual (Page 24)

2-4 Chapter 2: Hardware installation
2.2.3 Using USB bus power
1. Insert one end of the supplied RJ-45 cable to the WL-330gE Ethernet port.
2. Insert the other end of the RJ-45 cable to the Ethernet port on your computer,
notebook, modem or switch.
3. Insert one end of the supplied USB cable to the DC-IN socket of the device.
4. Insert the other end of the USB cable to any available USB port on your
computer, notebook, network hub, modem/switch, or router.
5. Turn on your computer/notebook, or connect the network hub, modem/switch,
or router power adapter to a wall socket.
6. Connect the power adapter of the network hub, computer/notebook, modem/
switch, or router to a wall socket.
USB
1 2 3
4
5

Modem/Switch/PC
WL-330gE
Wall socket