Asus WL-330gE - Manual (Page 40)

4-10 Chapter 4: Configuration
4.3.2 Quick Setup in AP mode
When you click the link Advance Setting from any of the modes in the Mode
Quick Setup page, the default page is the Access Point (AP) mode.
1. Click Next to enter the Quick Setup page. Follow the instructions to set up
the ASUS Access Point.
2 S e t mo d e t o A P o r
WDS(Bridge), Station(Client) or
URE(Repeater).
3. Setting up your wireless
interface. Specify to your
wireless router an SSID (Service
Set Identifier), which is a unique
identifier attached to packets
sent over WLAN. This identifier
emulates a password when a
device attempts to communicate with your wireless router via WLAN.
If you want to protect transmitted data, proceed to steps 4 and 5. Otherwise,
go to step 6.
4. Select a Security Level to enable
encryption methods.
Medium: Only users with the
same WEP key settings can
connect to your wireless router
and transmit data using 64bits or
128bits WEP key encryption.