Second hard disk drive module – Asus M8 User Manual
Page 42
42
4. Using
Second Hard Disk Drive Module
When using a second hard disk drive module for the first time, a few steps are needed to get it
working as follows:
1.
Purchase a hard disk drive module kit from an authorized dealer.
2.
Set the jumper to slave (drive 1) according to the manufacturer’s documentation or sticker.
3.
Secure the hard disk drive into the hard disk drive module using four screws.
4.
Insert into modular bay and check the drive information in BIOS setup. If only one hard disk drive
can be seen in BIOS setup, there may be a conflict in the jumper setting. Be sure that one hard disk
drive is set to master (drive 0) and the other to slave (drive 1).
5.
If necessary, refresh devices by: (1) right clicking the “My Computer” icon on the desktop, (2)
selecting “Properties” on the menu, (3) selecting the “Device Manager” tab, (4) clicking the “Re-
fresh” button, and (5) clicking “OK” button to finish.