Asus M8 - Manual (Page 49)

49
4. Using
Inserting a PC Card
2. Slowly slide the PC card out of the Notebook
PC.
2. Flip the eject button forward until it is hidden
inside the Notebook PC to lock the PC card in
place. 1. Insert the PC card, with the connector side first
and label side up, into the socket until it is flush
with the Notebook PC’s side. The eject button
will protrude out when fully inserted.
3. Carefully connect any cables or adapters needed by the PC card. Usually a sticker or marking is
used on one side of the connector to show the top side.
1. Flip the eject button out of the Notebook PC
and press the eject button until it is hidden in-
side the Notebook PC to eject the PC card.
Removing a PC Card
To remove the PC card, remove all cables or adapters attached to the PC card.