Asus M8 - Manual (Page 77)

77
5. BIOS Setup
I/O Device Configuration
Item Specific Help I/O Device Configuration
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Seral port A: [User]
Base I/O address: [3F8 IRQ4]
IR Port [User]
Base I/O address: [2F8 IRQ3]
Mode: [FIR]
DMA channel: [DMA 3]
Parallel Port: [User]
Mode: [EPP]
Base I/O address: [378/IRQ7]
Configure serial port A
using options:
Auto
[OS configuration]
User
[USER configuration]
Disabled
[NO configuration]
NOTE: The presence of sub-items in this menu is dependent on certain relevant settings.
CAUTION! Changing the default address and IRQ settings for COM1, COM2 and the
LPT Port can cause conflicts with other system devices or installed pe-
ripherals.
Serial Port A: [User]
This field allows you to configure the Notebook PC serial COM1 port. The configuration options
are: [Disabled] [User] [Auto]
Base I/O address: (when User is selected in Serial Port A:)
When User is selected, the Base I/O address field allows you to set the serial port IRQ and I/O
address. The configuration options are: [3F8, IRQ 4] [2F8, IRQ 3] [3E8, IRQ 4] [2E8, IRQ 3]
IR port: [User]
This field allows you to configure the Notebook PC’s serial IR port. The configuration options are:
[Disabled] [User] [Auto]
Base I/O address: (when User is selected in IR port)
When User is selected, the Base I/O address field allows you to set the serial port IRQ and I/O
addresses. The configuration options are: [3F8 IRQ4] [2F8 IRQ3] [3E8 IRQ4] [2E8 IRQ3]