Asus GigaX2124X/C - Manual (Page 75)

GigaX Series L2 Managed Switch User Guide
75
CLI command : l2 trunk rtag <1|2|3>
Rtag values and corresponding meanings:
1: source XOR destination MAC(L2),
2: source XOR destination IP(L3)
3. source XOR destination Port(L4).
[Create Trunk]
Creates a new trunk group by giving trunk ID, rtag, name, LACP mode and
port numbers. The “rtag” is the packet distribution algorithm for the trunk group.
CLI command : l2 trunk create <trunk id> <trunk name> <lacp
(enable/disable)> <port list>
[Add/Remove Trunk]
Trunk group port members can be added to or removed from an existing trunk
group.
CLI command : l2 trunk add <trunk id> <port list>
CLI command : l2 trunk remove <trunk id> <port list>
[LACP Action]
User can enable or disable LACP on a specific trunk group.
CLI command : l2 trunk lacp action <trunk id> <enable/disable>
[LACP System Priority]
User can assign the system priority for running LACP.
CLI command : l2 trunk lacp syspri <priority (1-65535)>
[LACP Port Priority]
User can assign the port priority for running LACP.